Water Repellants, Damp- & Water-Proofing

Water Repellants, Damp- & Water-Proofing

Water Repellents

Brick, masonry, and concrete stains can be prevented with the application of the right chemical compounds. These products, referred to as “water-repellents” are usually Siloxane- or Silane-based (in order of performance, high to low), and penetrate into the pores of these substrates preventing water-penetration. Our Waterban® 90 high-solids Siloxane anchors this product group, setting the bar very high for any competitors.

Damp-Proofing Products

Damp-proofing is a necessity in a geographical area where there is significant amounts of water or potential for serious water-penetration. Application of these products will significantly extend the life-expectancy and decrease maintenance issues of any building subject to these conditions. Having our main product facility in Orlando, Florida, Lambert has had sixty years to perfect the product needed for this situation and thus presents Waterban® 60, an asphaltic compound that can be procured in three viscosities allowing application by spray, roller, or trowel.

Water-Proofing Compounds

Water-proofing compounds take protection to the extreme, providing prevention of water-penetration in entirety where they are installed. These characteristics can be achieved using a variety of chemical technologies, from acrylic or bituminous, to cementitious. Trust Lambert Corporation to provide solutions in this area with products such as Waterban® 55, our elastomeric asphaltic water-proofing compound.

Water Repellents

Waterban® 90 is a solvent-based siloxane penetrating water-repellentclear liquid water repellent designed for use on above grade exterior vertical or horizontal cementitious substrates.

Technical Data Sheets

Safety Data Sheets

CSI Section Guide

Damp-Proofing Products

Waterban® 60 is a single-component asphaltic emulsion manufactured in three different viscosities, fibrated and non-, and designed to be used as an above-grade damp-proof coating.

Technical Data Sheets

Safety Data Sheets

CSI Section Guide

Water-Proofing Products

Waterban® 55 is a single-component, non-flammable, asbestos-free, latex-modified asphalt-emulsion waterproof coating designed to waterproof cementitious substrates above- and below-grade.

Technical Data Sheets

Safety Data Sheets

CSI Section Guide

Seeking further information or require assistance with your situation?Contact Us